Do Ring Cameras Work Without WiFi? (2023)

When you buy through links in this article, I may earn an affiliate commission. Learn More.

Wireless security cameras and doorbells provide a much more convenient option for those places where you don’t have, or can’t run, physical cable. Ring is one of the best-known brands of such smart home devices, and while they offer numerous benefits in addition to their installation ease they are not without downsides.

All of these types of devices use some sort of wireless radio communication instead of a cable feed, most often this is common Wi-Fi, as is the case with most Ring cameras. This is the ‘Achilles heel’ if there is no backup plan for what to do when the Wi-Fi is down. Some Ring products offer alternatives so that some functionality is retained in these cases, but not always.

Does Ring Still work without Wi-Fi?

Almost all Ring devices need a Wi-Fi connection in order to send video streams back to Ring’s servers where the smarts take place, the video is saved, and notifications back to your phone are generated. The exception here is the ‘Elite’ models which can use wired Ethernet for both data and power using a Power over Ethernet (PoE) capable switch or router.

In the case of Ring’s security cameras and video doorbells, you are generally not going to be able to use them at all without a Wi-Fi connection. Note that Ring doorbells will still chime from their internal speaker but won’t be able to connect to a remote Chime to ring inside or send you a notification.

Some Non-camera smart home devices, such as Ring smart lights, operate over Z-Wave and communicate with the Ring Alarm base station directly, so these do not need Wi-Fi to be motion activated, and you may still be able to control them manually over the Amazon Sidewalk network if there is sufficient coverage in your street. Ring Alarm can also work as normal if you have a ‘Protect Pro’ subscription which enables the cellular backup internet connection on the base station.

Which Cameras Need Wi-Fi?

All Ring cameras work over Wi-Fi to run the setup process simply because this is done on your smart phone via the Ring app, but the Video Doorbell Elite and Stick Up Cam Elite indoor/outdoor camera can operate thereafter on only their wired Ethernet connection. You still need an active internet connection, though, as the cameras are still reliant on Ring’s servers.

(Video) What happens when Ring goes offline?

The Elite models use a technology called Power Over Ethernet (PoE) which allows a conventional Ethernet cable to also carry power for the device. To use this, you’ll need a PoE compatible network switch or router, or a power injector to provide the power supply.

All other devices need at least 2.4GHz Wi-Fi, with the following cameras also supporting 5GHz dual band Wi-Fi:

  • Ring Video Doorbell 3

  • Ring Video Doorbell 3 Plus

  • Ring Video Doorbell 4

  • Ring Video Doorbell Pro

  • Ring Video Doorbell Pro 2

  • Ring Video Doorbell Elite

    (Video) Do You Need Wifi to Use Ring Doorbell?

  • Floodlight Cam Wired Plus

  • Floodlight Cam Wired Pro

What Happens If The Wi-Fi Is Down?

As with many smart home devices, Ring cameras and doorbells use cloud servers for much of their smart functions including object detection and sending notifications. All video recording is done in the cloud as well, so when they can’t access the internet they can’t do much at all. They will still detect motion but can’t do anything with it as they have no way to send an alert of record the event.

Ring doorbells also rely on their Wi-Fi connection to trigger Ring Chime devices so, without that, your Chime won’t ring when the doorbell is pressed, and the doorbell camera won’t be able to send data for the live video feed (although the doorbell itself will still make a chime sound).

Can Ring cameras record locally?

These cameras are pure cloud devices and sending data to Ring’s servers is their only method of recording video. No Ring security or doorbell cameras contain onboard storage or has any way to add any, nor do they support sending to any external recording device like Network Video Recorders (NVRs). For this reason, a good internet connection is essential to a good experience and reliable operation.

Can Ring devices use cellular backup?

If you opt for a Ring Alarm security system, you could have a cellular backup option for your internet connection. The base station has a built in eero Wi-Fi 6 mesh router and has a cellular backup radio which you can use if you have subscribed to the Ring Protect Pro plan, their highest tier.

If you are using the Ring Alarm as your internet router, this cellular backup option will allow all your connected smart home devices to get to the internet, including your Ring cameras. You’ll only have 3GB of data per month included, though, and your cameras can chew this up pretty quickly if you’re on cellular for an extended period of time.

Note that this option is only helpful if your internet connection goes out. Your own home Wi-Fi network still needs to be up for the cameras to connect to the Ring Alarm base station in order to access the cellular connection. If your Wi-Fi is out then that means the base station is probably the problem, and the cellular network isn’t going to help.

(Video) Installing Ring Security System in a place without internet.

Can you set up Ring cameras without Wi-Fi?

In order to set up new Ring devices, such as a camera or doorbell, you will need to use the Ring app on your smart phone. The app will establish a direct ‘ad-hoc’ Wi-Fi connection to the camera in order to associate the device with your Ring account, perform the configuration steps, and connect the camera to your home network. Even if the camera will ultimately use Ethernet (in the case of Elite models) you still need to use Wi-Fi to perform that set up process.

For the non-Elite models, you will need to specify the Wi-Fi network to connect to and provide the necessary connection details. The camera will then connect to the network before appearing in the Ring app. In these cases, your Wi-Fi will need to be working and reachable by the camera.

Will a Ring camera recover automatically after a Wi-Fi outage?

Ring cameras and doorbells have a robust Wi-Fi implementation and can work well where some other Wi-Fi-based cameras wouldn’t. Besides handling degraded signal strength, they also come back online quickly and reliably after an outage, and work well with mesh routers as well.

Does turning off Wi-Fi disable Ring cameras?

Given that the camera won’t be able to record anything or send any alerts, then effectively it will be disabled while the Wi-Fi is not available. This is, in fact, the major weakness of Wi-Fi based security cameras as a determined attacker could use an inexpensive Wi-Fi jammer to render your surveillance system useless.

The camera won’t be permanently disabled, though, and will recover quickly once it can get a Wi-Fi signal again. You’ll also get notifications from Ring when a camera becomes unresponsive, so you’ll know if something is up.

Troubleshooting Wi-Fi Problems

The first place to go if you suspect Wi-Fi problems with a Ring camera is the Device Health screen in the Ring app.

  1. From the main menu of the Ring app tap Devices

  2. Tap the device to check

    (Video) Ring Video Doorbell: Review! How does it work?

  3. Tap the Device Health tile

In the Network section of the details that come up you’ll see the network name (SSID) and the signal strength. This will be color coded as a general indicator of how good it is. When looking as RSSI values, the lower number is better. Tapping the ? next to the number will take you to Ring’s help page explaining this. Green or Yellow values should provide sufficient signal for reliable operation.

If the signal is Red, you should look at relocating the camera, the router, or if you have a mesh network, the nearest node to improve the signal strength. Ensure that the router or mesh node is obstructed as little as possible by furniture, walls, or other electrical appliances that may cause interference.

If this is not possible, you could try using a Ring Chime Pro. The Chime Pro connects to your Wi-Fi like any other Ring device, but then creates its own Wi-Fi network that you can connect your cameras in order to extend the signal. If you can place a Chime Pro closer to the camera this may solve the problem.

Once the chime is set up in the Ring app you’ll need to switch the Wi-Fi network of the camera over to it. You do this by going to the settings page of the Chime Pro, tapping the Chime Network tile, and selecting the camera you want to switch over.

FAQs

What happens if Ring camera loses Wi-Fi? ›

Your Ring Alarm usually communicates with you or your monitoring service through the internet via wifi or an Ethernet cable. Any time your Base Station loses its connection to the internet, regardless of the cause, a cellular backup system kicks in that will allow the system to continue to monitor your home.

Can you use Ring camera without Wi-Fi? ›

Ring security cameras do not work without Wi-Fi.

How can I use Ring app without Wi-Fi? ›

Ring Doorbells do not work without a wifi connection. There is no limited functionality as the Doorbell requires a stable internet connection in order to function.

How far can a Ring be away from Wi-Fi? ›

In general, a Ring Doorbell cannot be more than 30 feet away from the router. However, your Ring Doorbell's internet connection does not depend on its location; it depends on the strength of your internet connection. A strong internet connection will power your device no matter where it is located.

Does Ring work with cellular data? ›

Your Ring Protect Pro plan includes 3GB of cellular data every month. You can also opt in to Extra Data, and get more cellular data for $3/GB.

Can someone else disable my Ring camera? ›

Only the owner of a Ring device can deactivate it. You won't be able to control or change any of the device settings after your device is deactivated. Your videos are stored in the cloud only with a Ring Protect Plan, and the storage time may vary based on your Video Storage Time settings.

Can someone stop your Ring camera? ›

Researchers at Dojo, an internet of things security company, have found that bad actors can intercept your Ring doorbell by accessing the network it uses. This is possible because the data traveling between the Ring device and its application is not encrypted.

How do you hide a Ring camera in plain sight? ›

How to hide a camera inside?
  1. Kitchen or other Cabinets. Cabinets that are in your rooms are the simplest way to hide anything! ...
  2. Plants. The next simplest thing to do in order to hide a camera inside your house is by using plants. ...
  3. Different Accessories. ...
  4. Smoke Detectors. ...
  5. Put it in a Picture Frame.
2 Apr 2022

How many feet can a Ring camera see? ›

Motion detection on video doorbells can detect motion up to 30 feet from the camera. For enhanced motion detection, make sure you have the latest version of the Ring app downloaded on your iOS or Android. Read more about Bird's Eye View, which provides an aerial map for motion events around your property.

Does turning off Wi-Fi disable Ring camera? ›

What Happens To Your Ring Doorbells and Cameras When The Wi-Fi Is Off? Essentially – nothing! Without access to the internet in some form or fashion, Ring Doorbells and Cameras cannot detect nor record motion. Your Ring doorbell may still ring – but it will only be heard outside from the actual device.

How far will Ring pick up motion? ›

How far out does motion detection go? The motion detection on powered Ring devices can detect motion up to 30 feet away from the camera. How do I temporarily disable Motion completely?

Does Ring use data or Wi-Fi? ›

Each time you watch a saved videos via the Ring app, it will use LTE data, so keep this in mind.

How does ring work without a plan? ›

All Ring devices will work without a subscription. However, Ring cameras and video doorbells will not record videos without a subscription plan, and the Ring Alarm system will not be professionally monitored. Ring offers two optional subscription plans for users who do want these features.

Can you use ring without a smartphone? ›

Do I need a smartphone to use Ring? You'll need a compatible smartphone to setup your Ring Video Doorbell. One of the benefits of having a Ring video doorbell is that you get those alerts on your phone. But if the phones are out of the house, the Ring Video Doorbell will still ring.

Does Ring notify when connection is lost? ›

Although it is not a push notification, the Ring app will let you know if a device is offline when actively viewing it in the Ring app.

What do you do when your Ring goes offline? ›

Press the Setup button on the Ring device to put the device in setup mode. Wait 10 seconds, then press it again and see if your Ring automatically reconnects. If all else fails, check to make sure your device's battery is it's properly charged.

Does Ring notify when disconnected from Wi-Fi? ›

At this time, we do not have notifications for when your Ring Doorbell or Camera disconnects from the wifi and goes offline.

Is Ring still being hacked? ›

Are Ring devices secure? Ring expanded its end-to-end encryption to protect its users on many of its devices. Since the encryption has been added, we didn't find a lot of real-world instances where others have been hacked.

Can Ring be easily stolen? ›

Here's the thing, the Ring doorbell is fairly secure. It's secured with a backplate and security screws into the actual door frame of your home. But if a thief is that determined to steal your ring, with the right tools and a lot of force they could have it off in a few minutes.

Can someone disable my Ring camera? ›

Only the owner of a Ring device can deactivate it. You won't be able to control or change any of the device settings after your device is deactivated. Your videos are stored in the cloud only with a Ring Protect Plan, and the storage time may vary based on your Video Storage Time settings.

How long does Ring battery last? ›

6-12 months battery life (mixed reviews)

Ring reports that the battery should last anywhere from 6 to 12 months on one charge – depending on how much activity your video doorbell is recording.

Why Does My Ring go offline at night? ›

If your Ring Doorbell keeps going offline, it's generally one of four common issues: what lies between your camera and router, Wi-Fi connectivity issues, power surges, and low battery. Other occurrences can create connection issues and cause your Ring Doorbell to lose connection, but they are not as typical.

Does turning off Wi-Fi stop Ring camera from recording? ›

Yes, turning off WiFi will disable a Ring camera. This is because Ring cameras do not have any local storage capability and must stream everything to the Ring cloud. Without a good WiFi connection they cannot connect to Ring's servers to save video, stream live, or send notifications of any kind.

Do Ring cameras record all the time? ›

No, Ring cameras do not record all the time, only when motion is detected by your device. Ring capture frequent Snapshots every 30 seconds or up to an hour depending on the camera and which frequency you selected in the app. However, there are other smart cameras on the market that provides 24/7 recording.

Videos

1. Ring Devices Without A Subscription: What Still Works (Hint: Not Much)
(Smart Home Point)
2. Reolink Go WIRE FREE 4G Mobile Security Camera | NO WIFI NO ELECTRICITY USE ANYWHERE!
(Geek Street)
3. How to Install Ring Video Doorbell (2nd Generation) - Wireless Install | Ring
(Ring)
4. Ring Video Doorbell (2nd-gen) review: An affordable and solid upgrade
(CNET)
5. Security Camera Behind Glass Window Setup (Updated) - Wyze, EZVIZ, Ring, Eufy + Litom Solar Light
(LifeHackster)
6. Best Outdoor Wireless WIFI Security Cameras of 2022 - Reolink, Eufy, Ring, Arlo, Nest, Wyze, Blink
(LifeHackster)
Top Articles
Latest Posts
Article information

Author: Mrs. Angelic Larkin

Last Updated: 12/02/2022

Views: 6644

Rating: 4.7 / 5 (47 voted)

Reviews: 86% of readers found this page helpful

Author information

Name: Mrs. Angelic Larkin

Birthday: 1992-06-28

Address: Apt. 413 8275 Mueller Overpass, South Magnolia, IA 99527-6023

Phone: +6824704719725

Job: District Real-Estate Facilitator

Hobby: Letterboxing, Vacation, Poi, Homebrewing, Mountain biking, Slacklining, Cabaret

Introduction: My name is Mrs. Angelic Larkin, I am a cute, charming, funny, determined, inexpensive, joyous, cheerful person who loves writing and wants to share my knowledge and understanding with you.